This ultra-mobile and stylish unibody case offers astonishing A/D performance with a dynamic range of 139dB with equally impressive mic pres. Our pristine D/A technology ensures that you hear what your project deserves.

This Anubis Pro gives you exceptional performance up to 192kHz. 

ULTIMATE SOUND QUALITY.

Killer headphone circuit! Merging has invested great efforts in designing our best ever headphone preamplifier, offering the precision you need to evaluate your mix whatever the sample rate.

Anubis is engineered with the latest generation converter technology, coupled with 28 years of experience in designing excellence reference quality. A 32bit signal path from input to output via the mixer, combined with the latest circuit design, its short audio signal path decreases the latency and improves the power distribution. Phenomenal performance at any sample rate!

DUAL GAIN 32 BIT A/D CIRCUITRY.

Not only does this provide huge dynamic range with ample headroom, but you can control the gain independently for different circuits with clickless steps. It also allows for software add-ons. Creative innovation!

SPLIT CHANNEL ON ALL INPUTS.

Every input has a separate split gain control for sending them to different paths. Typically, one for the recording device and one for the FOH.

EXCEPTIONAL MECHANICS.

Anubis is not a piece of bent metal with a few knobs on the top. It may be a small desktop unit, but it is beautifully crafted from a single piece of aluminium. Inside is a miracle of production engineering under the guidance of masters of the miniature, Sonosax.  Swiss engineering at its best!

BACKPACK PORTABILITY.

Anubis is designed to go with you everywhere. Its rugged design and carry case with a weight of 950g and dimensions of 200 x 128 x 40mm, make it ideal for stuffing in a backpack. It fits easily on your desktop or can be mounted on a microphone stand.

DEVICE CONNECTIVITY.

The Anubis interface has two analog high quality combo connectors, and an additional two front line/instrument analog inputs. On the output side, you get two gold plated XLR and two TRS jacks. In addition, there are two independent stereo headphone jacks with the best quality amplification we have ever done. There is also MIDI IO or GPIO and the all-important AES67/RAVENNA connector.

MICROPHONE INPUTS 1-2 (COMBO)
Connector Type	Combo Locking Neutrik XLR / TRS
Dynamic Range Mic / Mic Lift	137 dB / 128 dB (A-weighted, typ.)
Max Input level Mic Pad / Mic / Mic Lift	+24 dBu / +12 dBu / +0 dBu
Frequency response +0/-0.2dB @ fs = 48 kHz	9 Hz – 22k Hz
Frequency response +0/-3dB @ fs = 96 kHz	9 Hz – 46 kHz
Frequency response +0/-3dB @ fs = 192 kHz	11 Hz – 94 kHz
THD+N Preamp + A/D 1kHz @ 0 dBFS	< -110 dB (0.0003%)
Interchannel Crosstalk @ 1kHz	< -130 dB
Equivalent Input Noise Mic / Mic Lift (150Ω Source)	< -125 dBu / -128 dBu (A-weighted, typ.)
Common Mode Rejection Rate (20 Hz – 20 kHz)	< -80 dB
Input Impedance (Differential)	~ 10kΩ
Gain Range (Software controlled)	0 dB to +66 dB
Gain Step Coarse / Fine	0.5 dB / 0.1 dB
Phantom Power (Software Switchable Per Channel)	+48V
Phase Reverse (Software Switchable Per Channel)	Yes
Low Cut filter (Software Switchable Per Channel)	-12 dB/octave, 80 Hz
5° low-end in-channel Ø deviation pt: Mic	9 Hz
Interchannel phase 10 Hz - 100 kHz	< ±2°

LINE INPUTS 1-2 (COMBO)
Connector Type	Combo Locking Neutrik XLR / TRS
Dynamic Range, ref +24 dBu	139 dB (A-weighted, typ.)
Max Line Input Level	+24 dBu
Input Impedance (Differential)	~ 10kΩ
THD+N Preamp + A/D 1kHz @ 0 dBFS	< - 104 dB (0.0006%)
Interchannel Crosstalk @ 1kHz	< -140 dB
Sensitivity Range for 0 dBFS (Software controlled)	+24 dBu to -42 dBu
Common Mode Rejection Rate (20 Hz – 20 kHz)	< -80 dB
5° low-end in-channel Ø deviation pt: Line	9 Hz
Interchannel phase 10 Hz - 100 kHz	< ±2°

INSTRUMENTS / HI-Z & LINE INPUTS 3-4
Connector Type	¼” TRS Female
Dynamic Range, ref +18 dBu	136 dB (A-weighted, typ.)
Max Input Level	+18 dBu
Input Impedance (Single ended / Differential)	~ 1MΩ / ~ 2MΩ
Gain Range (Software controlled)	0 dB to +66 dB
THD+N Preamp + A/D 1kHz @ 0 dBFS	< - 111 dB (0.0003%)
Interchannel Crosstalk @ 1kHz	< -150 dB
Sensitivity Range for 0 dBFS (software controlled)	+18 dBu to -48 dBu
Common Mode Rejection Rate (20 Hz – 20 kHz)	< -70 dB
5° low-end in-channel Ø deviation pt: Inst/Line	2 Hz
Interchannel phase 10 Hz - 100 kHz	< ±1°

MAIN OUTPUTS 1-2
Connector Type	Neutrik XLR Male
Dynamic Range	123 dB (A-weighted, typ.)
Max output Level (Differential / Single ended)	+24 dBu (12.2 Vrms) / +18 dBu (6.1 Vrms)
Frequency response +0/-0.2dB @ fs = 48 kHz	6 Hz – 22 kHz
Frequency response +0/-3dB @ fs = 96 kHz	2 Hz – 46 kHz
Frequency response +0/-3dB @ fs = 192 kHz	2 Hz – 92 kHz
Output Impedance	< 70Ω
THD+N 1 kHz @ 0 dBFS	< - 110 dB (0.0003%)
Output Level Matching	±0.01 dB
Attenuation Range (Software controlled)	- ∞ dB to 0 dB
Gain Step / Precision	0.5 dB / ±0.05 dB

LINE OUTPUTS 3-4
Connector Type	¼” TRS Female
Dynamic Range	123 dB (A-weighted, typ.)
Max output Level (Differential / Single ended)	+24 dBu (12.2 Vrms) / +18 dBu (6.1 Vrms)
Output Impedance	< 70Ω
THD+N 1 kHz @ 0 dBFS	< - 110 dB (0.0003%)
Output Level Matching	±0.01 dB
Attenuation Range (Software controlled)	- ∞ dB to 0 dB
Gain Step / Precision	0.5 dB / ±0.05 dB

HEADPHONES
Headphone Jacks	2 Independent ¼” TRS Female Stereo 6.3 mm
Dynamic Range (A-weighted, typ.) High / Low	< -122 dB / - 117 dB
Max output Level High / Low	17.1 dBu / 7.8 dBu
Frequency response +0/-0.2dB @ fs = 48 kHz	6 Hz – 22 kHz
Frequency response +0/-3dB @ fs = 96 kHz	2 Hz – 46 kHz
Frequency response +0/-3dB @ fs = 192 kHz	2 Hz – 92 kHz
Output Impedance	< 0.035Ω
THD+N 1 kHz @ 0 dBFS High / Low	< -108 dB (0.00039%) / -110 dB (0.0003%)
Attenuation Range (Software controlled)	- ∞ dB to 0 dB
Gain Step / Precision	0.5 dB / ±0.05 dB

A/D – D/A CONVERSION
Supported Sample Rates PRO	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
Supported Sample Rates PREMIUM	44.1 kHz up to 352.8 kHz (DXD), 384 kHz, DSD64, DSD128 & DSD256
Bit Depth Per Sample	32
A/D Latency Sharp Short delay @ 44.1kHz to 96kHz	5 samples
A/D Latency Sharp Short delay @ 174.6kHz to 192kHz	6 samples
A/D Latency Sharp Short delay @ 352.8kHz to 384kHz	7 samples
D/A Latency Sharp @ 44.1kHz to 384kHz	35 samples
D/A Latency Slow @ 44.1kHz to 384kHz	9 samples
D/A Latency Apodizing @ 44.1kHz to 384kHz	35 samples
D/A Latency Brickwall @ 44.1kHz to 384kHz	35 samples

COMPLEMENTARY I/O
RAVENNA/AES67 (Gigabit Ethernet)	Locking EtherCON compatible with standard RJ45 connectors
Built-in Talkback microphone	Mono omnidirectional condenser capsule
GPI/MIDI Input	¼” TRS Female
GPO/MIDI Output REDUNDANT POWER OPTIONS. Anubis is small and compact, it can be powered by its main PSU or/and from PoE (Power over Ethernet) making it a reliable redundant powered device. The input voltage range offers the possibility to use a wide range of power supply such as a battery. POWER Power Supply Voltage (DC) 9V to 15V DC Power Supply Connector Type Barrel jack, int. 2.5mm/out. 5.5mm, with locking function Power Consumption (Typ.) 15W P-o-E (Power Over Ethernet) IEEE 802.3at (PoE+) class 0 Power-over-Ethernet standard	¼” TRS Female