DPA 4099 CORE+ Microphone for Saxophone
Not currently in stock - ETA on pre-order 7-10 days
Free shipping! No tax!
DPA's latest CORE+ version of DPA's 4099 loud SPL subminiature mic! Next-generation, high-performance instrument microphone featuring CORE+ technology. Order number: DPA 4099-DP-1-199-S
- CORE+ technology
- High SPL handling
- Wide dynamic range
- Supercardioid pick up pattern
- Superior gain before feedback
- MicroLock® connector
- IP58 certified
- Advanced, flexible mounting clip assortment available
The 4099 microphone comes in two versions:
4099 CORE+ Mic, Loud SPL (red marking on gooseneck) – used to close-mic most types of acoustical instruments. – From the harp to the drums and everything in between. With CORE+, this mic has a max SPL, peak before clipping of 145 dB.
4099 CORE+ Mic, Extreme SPL (yellow marking on gooseneck) – used to close-mic extremely loud instruments, such as drums and some brass. Designed for use on drums, percussion instruments and other very loud instruments like, for example, the trumpet, this mic has a max SPL, peak before clipping of 154 dB.
You can buy a single 4099 alone or with a specific instrument clip, or you can choose a kit designed specifically for rock or classical applications. These kits come in 4-piece and 10-piece sets combined with the appropriate adapters, clips and cables that make it a breeze to set up your stage.
The 4099 piano stereo pair have a selected sensitivity tolerance of ±1.0 dB.
The 4099 accordion stereo pair have a selected sensitivity tolerance of ±1.0 dB.
DPA 4099-DP-1-199-S is supplied with:
Saxophone clamp mount
Gooseneck 140 mm
Low profile 1.8 meter cable from mic element to belt-pack adaptor
Belt-pack MicroLock to XLR adaptor
DPA 4099 Core Plus Specifications -
Directional pattern Supercardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz - 20 kHz
Effective frequency range ±2 dB, at 20 cm (7.9 in)80 Hz - 17 kHz with 2 dB soft boost at 10-12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
Distortion, THD < 0.5%135 dB SPL RMS, 138 dB SPL peak
Distortion, THD < 1%138 dB SPL RMS, 141 dB SPL peak
Dynamic range Typ. 118 dB
Max. SPL, THD 10%145 dB SPL peak
Rated output impedance From MicroLock: 30 - 40 Ω. From DAD9099 or DAD9001: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD9001/DAD9099 XLR Adapter
Output balance principle Signal balanced with DAD9099 or DAD9001 XLR Adapter
Common mode rejection ratio (CMRR)> 60 dB from 50 Hz to 15 kHz with DAD9099 or DAD9001 XLR Adapter
Power supply (for full performance) For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD9001 or DAD9099: P48 (Phantom Power). Will work from 12 V
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD9099 or DAD9001 XLR Adapter
Connector MicroLock
Weight Microphone: 18 g (0.63 oz)
Microphone Clip for Accordion (A-CLIP): 5 g (0.18 oz)
Clamp Mount Microphone Clip (CM-CLIP): 16 g (0.56 oz)
Microphone Stand Clip (MS-CLIP): 24 g (0.85 oz)
Microphone Clip for Piano (P-CLIP): 20 g (0.71 oz)
Universal Microphone Clip (U-CLIP): 15 g (0.53 oz)
Instrument Microphone Clip for Guitar (GC4099): 12 g (0.42 oz)
Instrument Microphone Clip for Sax and Trumpet (STC4099): 7 g (0.25 oz)
Instrument Microphone Clip for Violin and Mandolin (VC4099): 10 g (0.35 oz)
Instrument Microphone Clip for Bass (BC4099): 20 g (0.71 oz)
Microphone Clip for Cello (C-CLIP): 18 g (0.63 oz)
Microphone diameter 5.7 mm (0.22 in)
Microphone length 50 mm (1.97 in)
Cable length 1.8 m (5.9 ft)
(not included with 4099-DP-1 and 4099-DP-2)
Cable diameter 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
Polarity+V at MicroLock pin for positive sound pressure (and pin 2 on DAD9099 or DAD9001 XLR adapter)
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Gooseneck length 140 mm (5.5 in)
Sensitivity selection tolerance (at 1 kHz)±1 dB
Color Black
