Cascade Knuckle Head Classic Vintage-Style Ribbon Microphone

  • $ 349.00


All Cascade microphones are sold out


The KNUCKLE HEAD passive ribbon microphone combines the acoustic components of the successful Fat Head ribbon with a shock-mounted retro headbasket design reminiscent of early broadcast microphones.

The ribbon motor uses Neodymium magnets surrounding a 2.2-micron corrugated aluminum ribbon measuring 5mm x 45mm. The ribbon is mounted symmetrically within the magnetic gap, the front and back of the mic produces the same voicing.

The ribbon motor and headbasket are suspended within a 6-inch diameter metal hoop by eight springs. The output transformer is located within the cylindrical shaft below the shockmount hoop.

Typical Suggested Uses:

  • Acoustic & Electric Guitars
  • Vocals
  • Horns
  • Strings
  • Banjo, Mandolin, Dobro
  • Drums (overhead)

Specifications:

  • Type: Ribbon (velocity) Microphone
  • Ribbon type & Dimensions: 99% Pure aluminum, micron, 1 3/4" (L) X 3/16" (W)
  • Polar pattern: Figure 8 Symmetrical design
  • Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
  • Frequency response: See PDF below
  • Output Impedance: <=200 Ohms
  • Recommended load impedance:>1000 Ohms Max.SPL (1% THD @1000 Hz): 135 dB
  • Connector: 3-Pin male XLR
  • Size: Diameter: O.D. grill:3", O.D. ring:6", O.D. body:1", Overall length:10"

Includes:

  • Knuckle Head ribbon microphone
  • Aluminum flight case
  • Adjustable mounting clip