Audio-Technica AT4051b Cardioid Condenser Microphone USED ITEM

AT4051b microphone - Used item.  Box is shop-worn but otherwise in immaculate condition.  SOLD

Ideal for pro recording and critical applications in broadcast, this versatile studio mic may be used with confidence in a wide variety of professional applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

The A-T4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule. Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL).

• Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement

• High front-to-back rejection ratio—cardioid polar pattern improves isolation of desired sound source

• Direct-coupled, balanced output results in a clean signal even under high-output conditions

• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

• Switchable 80 Hz hi-pass filter and 10 dB pad

• Rugged turned-brass microphone housing for enduring dependability

• State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards

• ELEMENT	Externally polarized (DC bias) capacitor
  POLAR PATTERN	Cardioid
  FREQUENCY RESPONSE	20-20,000 Hz
  LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave
  OPEN CIRCUIT SENSITIVITY	-34 dB (19.9 mV) re 1V at 1 Pa
  IMPEDANCE	50 ohms
  MAXIMUM INPUT SOUND LEVEL	145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  NOISE	16 dB SPL
  DYNAMIC RANGE (typical)	129 dB, 1 kHz at Max SPL
  SIGNAL-TO-NOISE RATIO	78 dB, 1 kHz at 1 Pa
  PHANTOM POWER REQUIREMENTS	48V DC, 4.8 mA typical
  SWITCH	Flat, roll-off; 10 dB pad (nominal)
  WEIGHT	126 g (4.4 oz)
  DIMENSIONS	155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
  OUTPUT CONNECTOR	Integral 3-pin XLRM-type