Focal Sub12 Active Subwoofer Single

  • $ 2,999.00


Focal SUB12 PROFESSIONAL SUBWOOFER - contact us to place your order - ships directly from Focal

For producers and sound engineers looking for deep sub-bass, here is the answer: Sub12. Made in France in Focal’s own workshops, this subwoofer delivers unrivalled articulation, impact and depth. Thanks to its 13” (33cm) speaker driver with ‘W’-shaped cone and very high excursion, as well as its BASH amplifier with 600W RMS and 1000W peak-to-peak power, the sound reproduction is more impactful and faithful than ever.

In addition, there are optimised braces and a front vent inspired by Focal’s Trio11 monitors, as well as internal and external vents to reduce noise and distortion. At the back, a full set of bass controls can be used to perfectly adjust the settings for any system – low-pass, high-pass and variable phases – making Sub12 a truly remarkable professional tool.

In addition to its large laminar vent eliminating noise and distortion, Sub12 is equipped with a disengageable automatic standby mode, and offers variable user controls for low-pass, high-pass and phase, allowing ultimate precision for obtaining the perfect studio sound. Lastly, for greater practicality, large handles on the sides of the cabinet allow this product to be easily transported by two people.

The rear controls on Sub12 include switches for polarity, +4dBu or -10dBv sensitivity, automatic standby bypass, input and Throughout LFE. Sub12 also has an input and output for a switch on the stand, for connecting the bypass for a single Sub12 or simultaneously across several Sub12 subwoofers.

COMPOSITE ‘W’ SANDWICH CONE

The ‘W’ composite cone is made in France by Focal and allows the frequency response curve to be perfectly optimised. This cone’s unique characteristics of lightness and rigidity control the signal transmission speed within the material. The modulation of the structural foam’s thickness provides very precise control of the cone’s damping quality. When you’re listening, it creates total sound transparency, a very low distortion rate and an excellent phase response.

• Composite sandwich ‘W’-cone: sound neutrality, low distortion

• Large laminar port: no port noises or distortion

• Automatic disengageable stand-by mode

• Amplification: 600W RMS, 1000W peak

• Carry handle

Carrying handle

Large laminar port

Type

Subwoofer

Frequency response (@ -3dB)

30Hz - 400Hz

Low cut-off frequency (@ -6dB)

28Hz

Maximum SPL (Average CEA2010B 30-200 Hz free field @ 1m)

124.5dB

Inputs

Balanced XLR LFE 10kΩ, Left & Right 10kΩ

Outputs

Balanced XLR LFE (in parallel), Left & Right 50Ω

Bass amplifier stage

600W RMS

Nominal power supply

~100–120 VAC/220–240 VAC 50/60Hz

User controls

Sensitivity, Stand-by, Polarity, Phase, LPF, Volume, HPF

Fuses

~100-120V, T10AL/250V ~220-240V, T5AL/250V

Internal signal processing and functions
- Subwoofer section

Left/right mono summation LFE + mono low-pass 24dB/octave
Phase adjustment

Polarity selection
Switchable high-pass crossover, frequency cut-off selection 24dB/octave

Outputs (to satellites) - Type/Impedance
- Connector

Right, left
Electronically balanced / 50Ω 3-point male XLR

Bass

1 x 13" (33cm) x ‘W’ cone

Shielding

No

Construction

Dark red natural veneering side panels, black body

Dimensions (HxWxD)

235/8x191/8x223/8" (60x48.7x56.8cm)

Weight

127.8lbs (58kg)

Temperature range

During use: 5-35°C In storage: 0-50°C