AEA N13 Nuvo Mid-Field Active Ribbon microphone New
AEA N13 Ribbon Microphone in stock at Tidepool!
Free shipping! No tax!
The new AEA N13 ribbon microphone is natural and open at a mid-field distance, with a particularly strong ability to pick up fast transients. The latest mic in AEA's NUVO series and relatively bright for a ribbon mic, the N13 microphone excels in capturing drum overheads, strings, acoustic guitars, and piano.
With phantom-powered JFET electronics and a custom German transformer, the AEA N13 performs equally well with a wide range of preamps ranging from vintage high-end models to USB audio interfaces common in home studio setups. The full potential of the N13 is perhaps best realized when configured in the NUVO Stereo Kit, as it draws on the same successful sonic concepts as the AEA R88 stereo mic.
HOW IS THE N13 DIFFERENT FROM THE N8 AND N22?
AEA’s NUVO series microphones have long been a favorite at Tidepool Audio for their clarity, portability, and higher-output active electronics. The near-field N22 delivers clarity and balance for close-up sources, while the far-field N8 excels at capturing the open, natural tonality of entire rooms and ensembles. The only missing piece? A stand-out mid-field companion.
Enter the N13, an equally sleek active ribbon designed with some distinctly different considerations in mind. At once open and natural, the N13 excels at medium-distance miking applications while demonstrating an impressive transient response. The N13 features a new motor design as well as a thinner, smaller ribbon (1.2 microns, rather than our standard 1.8), making it our first non-Big Ribbon™ bidirectional mic.
Bright and sonically distinct from our N22 model, the N13 excels in capturing the subtle nuances of strings, acoustic guitars, and percussion. It’s also well-suited for any sources that could use a boost in top-end clarity. Even when used up close, such as on horns or vocals, the N13 delivers exceptional clarity while also taking EQ extremely well.
- AEA's first non-Big Ribbon™ bidirectional microphone
- Evenly balanced proximity effect at mid-field distances (~8”-36”)
- 1.2 micron thick ribbon excels at capturing transients
- Low profile and slate gray finish for discreet placement
- Shines on horns, strings, acoustic guitar, and drum overheads
- Made in the U.S.A.
“SINCE AUDITIONING THE NEW AEA N13 I HAVE REALLY COME TO LOVE ITS BEEFY MIDS AND FLUFFY HIGHS!
IT IS DIFFICULT TO FIND A MICROPHONE THAT CAN ACCURATELY, BUT FAITHFULLY REPRODUCE THE STRONG MIDS AND WARM UPPER END OF MOST HORNS. THIS IS ESPECIALLY TRUE WHEN RECORDING AT 96K. THERE IS NOT A WHOLE LOT OF “WHAT YOU WANT TO HEAR” IN A TUBA SOUND WAY UP HIGH. MOSTLY BREATH AND SPIT SOUNDS. YET, IF THE HIGHS ARE NOT THERE, THE HORN WILL NOT SIT WELL IN THE MIX.
…THANKS AGAIN AEA FOR MAKING IT SOUND GREAT RIGHT OUT OF THE BOX!”
“THE AEA N13 MICROPHONE IS A WELCOME COMPLEMENT TO MY TRUSTY R88 STEREO MIC, WHICH I USE ON SO MANY DIFFERENT FAMILIES OF INSTRUMENTS.
LIKE THE R88, THE N13 MAKES ME VERY HAPPY BY CAPTURING A WARM YET DETAILED TONE ON STRINGS, ACOUSTIC GUITAR AND EVEN AS A MONO DRUM MIC.”
- Eric Gorfain, Arranger, Violinist, Remote Recording Engineer, The Section Quartet
Operating Principle: Pressure gradient transducer
Directional Pattern: Bidirectional
Frequency Range: <20 Hz to >20 kHz
Maximum SPL: 139 dB SPL (1% third harmonic > 1 kHz)
Sensitivity: 11.48 mV/Pa (-38.8 dBV) (at 1 kHz, no load)
Output Impedance: 92 Ω broadband
Rec Load Impedance: 1.0 kΩ or greater
Phantom Power: P48 phantom power, 7 mA
Polarity: Pin-2 high for positive pressure at the front of the microphone.
Off-Axis Response
Horizontal: Up to 90 dB rejection at right angles to the front/back axis.
Vertical: Level changes with angle of incidence, but frequency response is consistent.
Transducer Element
Material: Pure aluminum corrugated ribbon
Thickness: 1.2 μm
Width: 0.113 in (2.87 mm)
Length: 1.30 in (33.0 mm)
Microphone Dimensions:
Height: 8.83 in (22.5 cm)
Width: 1.62 in (11.7 cm)
Depth: 1.62 in (9.5 cm)
Weight: 12 oz (335 g)
Shipping Weight: 1 lb 13 oz (810 g)
Connector: XLR-3M
Accessories Included: Storage/shipping case, mic stand clip, soft cloth bag, user manual.